400 Volt

Sold out

BHI milling machine V-1.2, 400 Volt / 40 - 70 mm

High quality BHI plastering and milling machine with electric motor and reduction gear,adjustable milling head. 115 mm log intake, possibility of adjustingof the milling result from 40 to 70 mm. Precision knives, easy change of knives due to fixed knife seat. Protective flap with automaticautomatic shutter. The built-in reduction gear optimises speed and power. This considerably reduces the amount of force and jerking movements during the reduced. The individually positionable foot switch ensures easy operation.Technical data400 volt 1.5 kW Milling head adjustable 40 to 70 mm 550 rpm GS testedWeight approx. 52 kg

€2,599.00*

Details

Only 1 available

BHI milling machine, 400 Volt / 70 - 90 mm

High quality BHI plastering and milling machine with 400 volt electric motor,adjustable milling head. 125 mm log intake, possibility of adjustingof the milling result from 70 to 90 mm. Precision blade, easyknife change due to fixed knife seat. Protective flap with automaticautomatic lock. Low-wear three-phase motor with constant power. The individually placeable foot switch ensures easy operation.Technical data400 volt 2.2 kW Milling head adjustable 70 to 90 mm 550 rpm GS testedWeight approx. 54 kg

€2,779.00*

Chip bag made of Kraft pape

1 pack = 25 pieces Chip bag made of Kraft paper, 2-ply 80 g / sqm suitable for Wacker sharpening machine. 45 x 60 + 20 cm base, 2-ply with glued filling rim and thumb rash

Content: 25 Stk (€0.61* / 1 Stk)

€15.30* €39.90* (61.65% saved)

Only 6 available

Wacker plastering and milling machine 400 Volt without reduction gearbox

Wacker plastering and milling machine 400 Volt without reduction gearboxWacker cleaning and milling machine 400 volts without reduction gear up to 180 mm trunk diameter, fixed two-blade milling head made of solid aluminium with precision blades, milling result (30 mm / 40 mm / 50 mm / 60 mm / 70 mm / 80 mm) depending on the selected milling head, reinforced shaft ball bearings and protective flap with automatic closure. The individually placeable foot switch ensures easy operation. All machines are equipped with full aluminium heads for fettling as well as milling.Technical dataTwo-knife cutter head made of solid aluminium with precision knives for trunk diameters up to 180 mmMilling result 30 mm / 40 mm / 50 mm / 60 mm / 70 mm / 80 mm depending on the selected milling headMilling length 130 mm400 V / 2.2 kWProtection class IP 551400 rpm without reduction gearthermal overload protectionautomatic motor brakelow-wear three-phase motor with constant outputGS tested operating instructions:https://silvatrees.de/wp-content/uploads/2021/03/Wacker_Bedienungsanleitung.pdf

€1,230.00*

Details